spot_img
HomeConversationsProposed Minimum Wage Structure and Productivity Improvement for Bangladesh’s RMG Industry

Proposed Minimum Wage Structure and Productivity Improvement for Bangladesh’s RMG Industry

spot_img

Dear Fellow Industry Owners and Colleagues,

Bangladesh’s Ready-Made Garment (RMG) industry remains one of the key pillars of the national economy, contributing significantly to foreign exchange earnings, employment generation, women’s economic empowerment, and industrial development. However, ensuring the industry’s long-term sustainability requires a balanced approach that addresses fair wages, employment generation, workforce skill development, productivity enhancement, and international competitiveness.

Figure: Engineer Mohammad Aktaruzzaman, Former Chairman, BGMEA Standing Committee on Compliance, Managing Director, ENTRUST Group

Increasing the minimum wage alone cannot guarantee workers’ long-term welfare. Sustainable employment opportunities, improved productivity, and the industry’s overall financial viability must also be secured.

Drawing on my extensive experience in the garment industry and involvement in BGMEA’s compliance-related activities, I would like to present several observations and policy recommendations concerning Bangladesh’s existing minimum wage structure. These proposals are intended for consideration by BGMEA, BKMEA, relevant government authorities, international buyers and brands, and other industry stakeholders.

1. Historical Overview of Minimum Wage Revisions in Bangladesh

The monthly gross minimum wage in Bangladesh’s RMG industry has undergone several revisions over the years:

  • 1984: BDT 627 (initial minimum wage)
  • 1994: BDT 930 (48.33% increase)
  • 2006: BDT 1,662.50 (78.76% increase)
  • 2010: BDT 3,000 (80.45% increase)
  • 2013: BDT 5,300 (76.67% increase)
  • 2018: BDT 8,000 (50.94% increase)
  • 2023: BDT 12,500 (56.25% increase)

The intervals between minimum wage revisions have varied considerably, ranging from three to five years in some periods to as long as ten to twelve years in others. Therefore, calculating a proposed wage increase by simply averaging all historical revisions would not provide a realistic basis for determining a new minimum wage.

The 2018 and 2023 revisions provide a more relevant reference point because both followed five-year intervals. Consequently, these two revisions should receive greater consideration when assessing a potential wage adjustment.

When evaluating minimum wage revisions, it is important to consider not only the percentage increase but also the time elapsed between successive revisions.

Another important consideration is the existing provision for Probationary Workers. In 2018, the monthly gross wage for a Probationary Worker was BDT 5,975, which increased to BDT 9,875 in 2023. However, this provision has become increasingly difficult to implement in practice, as many compliance professionals representing international buyers and brands do not permit factories to recruit inexperienced workers under the Probationary Worker category as Helpers or Assistants.

2. Proposed Minimum Wage for 2026

The last two minimum wage revisions in Bangladesh’s RMG sector were:

  • 2018: 50.94% increase.
  • 2023: 56.25% increase.

The average increase was:

(50.94% + 56.25%) ÷ 2 = 53.595%

Both revisions followed five-year intervals. Therefore, applying a proportionate adjustment for a three-year period:

53.595% × 3 ÷ 5 = 32.157%

Applying this percentage to the existing monthly gross minimum wage of BDT 12,500:

BDT 12,500 + BDT 4,019.63 = BDT 16,519.63

Rounded to a practical figure, the proposed monthly gross minimum wage would be approximately BDT 16,520.

Based on this calculation, I propose:

The monthly gross minimum wage for an Entry-Level Worker with Basic Skills should be fixed at BDT 16,550.

This represents an increase of approximately 32.40% over the existing minimum wage of BDT 12,500.

It is important to clarify that this calculation represents a proportional analysis based on previous wage revisions. It is not intended to serve as a mandatory legal formula for determining minimum wages.

3. Simplifying the Existing Eight Statutory Wage Grades

The 2023 Minimum Wage Gazette contains two separate schedules:

  • Schedule A – Workers: Grades 1 to 4, covering production-related workers.
  • Schedule B – Employees/Staff: Grades 1 to 4, covering clerical, administrative, technical support, and service-related employees.

Together, these schedules establish eight statutory wage grades, alongside separate provisions for Probationary Workers.

However, garment factories differ significantly in terms of product categories, manufacturing technologies, production processes, job responsibilities, and required skill levels. Consequently, implementing a uniform and highly detailed statutory grading structure may not always be practical across the industry.

I therefore propose replacing the existing eight statutory wage grades and separate Probationary Worker provisions with a simplified Two-Level Minimum Wage Structure.

Under this approach, factories would have the flexibility to establish their own internal salary grades, designations, promotion policies, and performance-based compensation systems, while fully complying with statutory minimum wage requirements and protecting workers’ legal rights.

4. Proposed Two-Level Minimum Wage Structure

Level 1: Fresh / Unskilled Worker

I propose abolishing the existing separate Probationary Worker category, which currently carries a monthly gross wage of BDT 9,875, and introducing Fresh / Unskilled Worker as a regular employment category.

Proposed Monthly Gross Minimum Wage: BDT 12,500

Workers under this category would primarily support Skilled Workers through assisting, helping, and other appropriate supporting activities. This arrangement would provide opportunities to gain practical factory experience and receive structured on-the-job training.

Within a maximum period of three to six months, workers who successfully acquire the necessary basic skills through practical training and competency assessment would be promoted to Level 2, with a minimum monthly gross wage of BDT 16,550.

Level 2: Entry-Level Worker with Basic Skills

Proposed Monthly Gross Minimum Wage: BDT 16,550

This amount would represent the minimum wage for an Entry-Level Worker possessing basic skills, rather than a maximum salary limit.

Individual factories would be permitted to establish their own internal salary grades based on:

  • Product categories and manufacturing requirements.
  • Production processes and machinery.
  • Nature of work and job responsibilities.
  • Workers’ technical skills and experience.
  • Individual productivity and performance.

Workers could then progress to higher salary grades based on their skills, experience, responsibilities, and production capabilities.

Factories should have the flexibility to pay highly skilled and productive workers BDT 25,000 per month or even more, depending on their contributions and performance.

I firmly believe that combining this proposed wage structure with a voluntary piece-rate payment system, effective skill development, and productivity improvement initiatives would enable factories to offer higher wages while maintaining financial sustainability.

Improved sewing efficiency and productivity would reduce production costs per garment, strengthen international competitiveness, and encourage new workers to enter the garment industry. Ultimately, this would enhance Bangladesh’s competitive position while improving product quality, delivery performance, and international buyer confidence.

Paying higher wages to skilled workers should not be viewed merely as an additional financial burden. When supported by improved productivity, it can become a strategic investment in workers’ earnings, factory profitability, and international competitiveness.

The government should establish the statutory minimum wage, while individual factories should retain the flexibility to develop higher salary grades based on their production systems and workers’ competencies.

Any changes to the existing structure must, however, be supported by appropriate legal amendments and safeguards to protect the acquired rights of existing workers.

5. Introducing a Voluntary Piece-Rate Payment System

A Voluntary Piece-Rate Payment System could provide an effective mechanism for increasing both productivity and workers’ earnings.

The sweater industry already has practical experience with this payment approach. When workers’ earnings are directly linked to their production output, they may become more motivated to improve productivity while maintaining product quality.

However, in the woven and knit sectors, the conventional monthly salary structure often provides limited financial differentiation between highly skilled and less-skilled workers. As a result, workers who achieve higher productivity do not always receive adequate financial recognition.

A properly designed piece-rate system could deliver several benefits.

Benefits for Workers:

  • Greater earning opportunities through higher-quality production.
  • Stronger motivation to develop technical skills.
  • Opportunities to improve working speed and productivity.
  • Financial recognition of individual performance.

Benefits for Factories:

  • Increased production output.
  • Improved machinery utilization.
  • Reduced overhead costs per garment.
  • Better alignment between production output and performance-based compensation.

During periods of lower order volumes, factories would also avoid additional production-based compensation that has not been earned.

However, the system must remain entirely voluntary, transparent, and legally compliant.

Most importantly, introducing piece-rate payments must never result in the reduction of workers’ legally entitled minimum wages, overtime payments, leave, holidays, or any other statutory benefits.

BGMEA and BKMEA should initiate discussions with relevant government authorities, international buyers and brands, and compliance professionals to explore the feasibility of introducing this system across the woven, knit, and sweater sectors.

6. Creating Employment Opportunities and Practical Training for Inexperienced Workers

Many experienced sewing operators, technicians, and production professionals in today’s garment industry began their careers as Helpers or Assistants. Through practical factory experience, training, and continuous skill development, they gradually developed the competencies required for higher-level responsibilities.

However, some international buyers, brands, and their compliance professionals discourage or restrict the recruitment of inexperienced workers under the existing Probationary Worker provisions, primarily due to concerns regarding wage classification and compliance requirements.

As a result, employment opportunities for new entrants may become limited. At the same time, recruiting completely inexperienced workers at comparatively high starting wages may increase initial production costs and discourage some entrepreneurs from expanding employment opportunities.

A fundamental question therefore arises:

If inexperienced individuals are not given the opportunity to enter factories and learn through practical experience, how can they become skilled workers in the future?

I propose abolishing the separate Probationary Worker wage provision and formally recognizing Fresh / Unskilled Workers as a regular employment category.

Under the proposed structure:

  • Fresh / Unskilled Workers would receive a monthly gross minimum wage of BDT 12,500.
  • They would receive practical training through helping, assisting, and other suitable activities under the supervision of skilled workers.
  • Structured on-the-job training and competency assessments would help them develop essential skills.
  • Within a maximum period of three to six months, qualified workers would be promoted to Level 2, receiving a monthly gross minimum wage of BDT 16,550.

Achieving this objective will require constructive policy-level discussions with international buyers, brands, and compliance professionals to establish an acceptable framework for recruiting and training inexperienced workers.

Creating employment opportunities for new entrants is not merely a labour policy issue; it is a strategic investment in developing the skilled workforce of the future.

7. Strengthening International Competitiveness: Lower Wages Do Not Always Mean Lower Production Costs

Although monthly wages in Bangladesh are comparatively lower than those in several competing garment-producing countries, actual labour costs per garment are not necessarily proportionately lower.

One of the major contributing factors is the difference in sewing efficiency.

In many Bangladeshi factories, sewing efficiency is approximately 45–55%, whereas China and certain advanced production systems can achieve efficiency levels of 70–80%.

Therefore, international competitiveness should not be assessed solely on the basis of monthly wages. The number of quality garments produced within a given period is equally important.

International Comparison of Monthly Wages and Estimated Labour Costs

CountryMonthly Wage (USD)Sewing EfficiencyLabour Cost per Garment (USD)
Bangladesh (Current)$10250%$0.327
Bangladesh (Proposed)$134.7650%$0.432
China$35075%$0.748
Vietnam$18065%$0.444
India$16052.5%$0.488
Pakistan$14352.5%$0.437
Cambodia$21055%$0.612
Indonesia$16060%$0.427
Sri Lanka$9357.5%$0.259
Myanmar$9747.5%$0.327

Calculation Basis:

  • Standard Allowed Minutes (SAM): 20 minutes per garment.
  • Monthly working hours: 208 hours.
  • Exchange rate: USD 1 = BDT 122.81.

Formula:

Labour Cost per Garment = Monthly Wage × SAM ÷ (Monthly Working Minutes × Sewing Efficiency).

These figures represent illustrative estimates rather than verified national averages. Overtime payments, employee benefits, overhead expenses, and other production-related costs have not been included.

Comparative Findings

Based on the proposed monthly wage of BDT 16,550, Bangladesh’s estimated labour cost per garment would be approximately USD 0.432.

According to the illustrative comparison, this would be:

  • Approximately 2.7% lower than Vietnam.
  • Approximately 1.1% lower than Pakistan.
  • Approximately 11.5% lower than India.
  • Approximately 1.3% higher than Indonesia.

These estimates suggest that Bangladesh could remain competitive with several major garment-producing countries even after implementing the proposed wage increase.

However, sustaining this competitiveness will require substantial improvements in production efficiency, workforce skills, and manufacturing practices.

Moving Towards High-Value and Value-Added Garment Production

Countries such as China and Vietnam have strengthened their positions in the international apparel market through the production and export of comparatively higher-priced, better-quality, and value-added garments.

In contrast, Bangladesh’s garment industry remains significantly dependent on basic and low-value products.

Many woven casual garments manufactured in Bangladesh are exported at FOB prices of only USD 5–7 per piece. Such low-value products provide limited opportunities to absorb rising wages and production costs while maintaining healthy profit margins.

To remain internationally competitive, Bangladesh must gradually move beyond basic garment manufacturing and focus more strongly on high-value and value-added products.

This transition will require not only entrepreneurial initiatives but also effective government policies, industrial incentives, technological development, and greater investment in product diversification.

Government Support and Workers’ Social Safety Nets

Competing countries often provide various forms of government assistance and incentives to strengthen industrial competitiveness. Bangladesh also needs appropriate policy support for industrial entrepreneurs, alongside direct government initiatives to improve workers’ living standards.

In particular, the government should consider introducing:

  • Rationing facilities for essential food and consumer goods at affordable prices.
  • An effective social safety net for garment workers.
  • Appropriate industrial incentives for entrepreneurs.
  • Stronger legal measures to control unjustified increases in essential commodity prices.
  • Effective enforcement against market manipulation and excessive profiteering.

Increasing wages alone cannot guarantee improvements in workers’ real purchasing power. Controlling essential commodity prices, ensuring affordable access to basic necessities, and establishing effective social protection mechanisms are equally important.

These measures would help protect workers’ living standards while preserving the industry’s long-term competitiveness.

Improving Production Efficiency and Workplace Culture

Improving sewing efficiency must become a shared priority for factory management, BGMEA, BKMEA, and relevant government authorities.

However, productivity improvement is not solely a matter of introducing advanced technology, modern machinery, or better production planning. Workplace attitudes, accountability, motivation, and productivity culture also play important roles.

Over the past ten years, I have personally explored different approaches to improving production efficiency in my own factories. Based on these practical experiences, I have observed that workers and employees are not always sufficiently motivated or encouraged to utilize their full productive potential.

This challenge requires attention to workplace culture, management practices, training, performance measurement, and employee motivation.

A comprehensive approach should include:

  • Continuous technical and operational training.
  • Greater accountability at every level of factory operations.
  • Transparent performance-based incentive systems.
  • Improved production planning and industrial engineering.
  • Stronger quality management practices.
  • Greater cooperation between management and workers.

Our target should be to gradually increase average sewing efficiency from the current 45–55% to at least 70%.

Achieving this target would contribute significantly to higher workers’ earnings, improved factory profitability, and stronger international competitiveness.

If necessary, a national Productivity Improvement and Work Culture Development Programme should be introduced through coordinated efforts involving the government, industry associations, factory management, and workers’ representatives.

Increasing minimum wages alone cannot provide a permanent solution. Skill development, productivity improvement, and positive changes in workplace attitudes must also be ensured.

8. Ten Key Recommendations to BGMEA and BKMEA

Based on the above observations and proposals, I would like to present the following ten recommendations for consideration by BGMEA and BKMEA:

1. Balanced Minimum Wage Revision

Set the monthly gross minimum wage for Basic-Skilled Entry-Level Workers at BDT 16,550, considering the proportional analysis of the two most recent wage revisions.

2. Introduce a Two-Level Minimum Wage Structure

Replace the existing eight statutory wage grades and separate Probationary Worker provisions with two categories:

  • Level 1: Fresh / Unskilled Worker – BDT 12,500.
  • Level 2: Entry-Level Worker with Basic Skills – BDT 16,550.

3. Allow Factory-Specific Higher Salary Grades

Provide factories with the flexibility to establish internal salary grades and determine higher wages based on product categories, production processes, machinery, job responsibilities, and workers’ competencies. Highly skilled and productive workers should have opportunities to earn BDT 25,000 or more per month.

4. Introduce a Voluntary Piece-Rate Payment System

Explore the introduction of a voluntary piece-rate payment system across the woven, knit, and sweater sectors while ensuring full protection of minimum wages and all statutory benefits.

5. Expand Employment Opportunities for Inexperienced Workers

Develop an acceptable policy framework for recruiting Fresh / Unskilled Workers through constructive discussions with international buyers, brands, and compliance professionals.

6. Establish Practical Training and Competency Assessment

Introduce structured on-the-job training and competency assessment programmes to facilitate workers’ promotion to Level 2 within three to six months.

7. Implement a National Productivity Improvement Programme

Set a national target of achieving at least 70% sewing efficiency through industrial engineering, improved production planning, technical training, and effective quality management.

8. Assess International Competitiveness More Effectively

Evaluate competitiveness based on monthly wages, productivity-adjusted labour costs, production costs per garment, and product value addition rather than relying solely on wage comparisons.

9. Strengthen International Buyer Participation

Engage international buyers and brands in discussions concerning realistic FOB prices, responsible purchasing practices, and support for workforce development and the recruitment of inexperienced workers.

10. Ensure Government Support for Industry and Workers

Improve roads and transportation, deep-sea port facilities, uninterrupted and affordable electricity and gas supplies, competitive bank financing, customs clearance, port efficiency, and overall governance.

In addition, introduce appropriate industrial incentives, affordable rationing facilities, effective social safety nets for workers, and stronger legal measures to prevent unjustified increases in essential commodity prices.

9. Why Is the Government’s Role So Important?

Bangladesh competes with several garment-producing countries that benefit from comparatively stronger infrastructure, uninterrupted energy supplies, efficient transportation systems, modern port facilities, favourable financing arrangements, and various government incentives.

While factory owners are responsible for improving production efficiency and operational performance, the government has an equally important role in creating a supportive business environment.

This includes developing:

  • Roads, highways, and transportation infrastructure.
  • Efficient seaports and customs clearance systems.
  • Reliable and affordable electricity and gas supplies.
  • Accessible and competitive banking facilities.
  • Transparent administrative systems and good governance.
  • Appropriate industrial policies and investment incentives.

Similarly, placing the entire responsibility for workers’ living costs and social protection on factory owners alone could weaken the industry’s long-term financial sustainability.

The government should therefore take a more active role in introducing affordable rationing facilities, establishing effective social safety nets, and ensuring strict enforcement against unjustified commodity price increases and market manipulation.

Industrial entrepreneurs also require effective policy support and incentives to invest in productivity improvement, technological advancement, value addition, and export diversification.

Sustainable industrial development cannot be achieved through the efforts of entrepreneurs alone. It requires coordinated participation from the government, workers, factory owners, industry associations, and international buyers.

10. Conclusion: Building a More Competitive and Sustainable RMG Industry

Bangladesh’s garment industry must move beyond competing primarily on the basis of low wages.

Our long-term objectives should include fair wages, expanded employment opportunities, higher earnings for skilled workers, improved productivity, high-value and value-added garment production, and stronger international competitiveness.

To achieve these objectives, I propose the following two-level minimum wage structure:

  • Level 1 – Fresh / Unskilled Worker: BDT 12,500 per month.
  • Level 2 – Entry-Level Worker with Basic Skills: BDT 16,550 per month.

Beyond these minimum levels, individual factories should have the flexibility to establish higher salary grades based on their products, production processes, machinery, job responsibilities, and workers’ skills.

In addition, the industry should consider abolishing the separate Probationary Worker wage provisions, introducing a voluntary piece-rate payment system, developing inexperienced workers through structured on-the-job training, increasing sewing efficiency to at least 70%, and expanding high-value garment production.

At the same time, appropriate government incentives for industrial development, affordable rationing facilities, effective social safety nets, control of essential commodity prices, and infrastructure improvements will remain indispensable.

Our ultimate goal must be to build a garment industry in Bangladesh where workers receive fair wages, new employment opportunities are continuously created, skilled employees are financially rewarded, and entrepreneurs can operate sustainably while competing successfully in international markets.

I sincerely hope that the leadership of BGMEA and BKMEA, relevant government authorities, industrial entrepreneurs, workers’ representatives, international buyers and brands, and compliance professionals will give these proposals thoughtful consideration.

I welcome constructive opinions, recommendations, and suggestions from all concerned stakeholders to help build a more productive, inclusive, and globally competitive RMG industry in Bangladesh.

YOU MAY ALSO LIKE
- Advertisement - spot_img
spot_img

Join Our Weekly Newsletter

Upcoming Events

Simillar News

Recent Random

Call for establishing a ‘National AI Ecosystem’ to harness the Potential of Artificial Intelligence

Bangladesh AI Business Summit 2026 held at BCFCC Establishing a ‘National AI Ecosystem’ is essential for strengthening the Bangladesh’s capacity to address the growing challenges...

147 RMG factories declared fully closed: BGMEA

Bangladesh Garment Manufacturers and Exporters Association (BGMEA) President Mahmud Hasan Khan has said a total of 147 garment factories across the country have been...

ANDRITZ Customer Day 2027: Building a sustainable packaging ecosystem together 

ANDRITZ will host the Sustainable Packaging Days 2027 on March 18–19, 2027, at the ANDRITZ  France facility in Montbonnot, France. The event will bring...