Monday, December 2, 2024
spot_img
spot_imgspot_img

Cutting Room

Cutting room is an extremely important section in the garment manufacturing process which has a major impact on the profitability of the business. IT is therefore important to an efficient management of the cutting room in garment manufacturing process.

cutting-roomGarment production starts with the cutting process. In this process, fabric is being cut into components (shapes or patterns of different garment parts, i.e. front, back, sleeve, collar shapes etc.). In mass production multiple layers of fabrics are laid on a table and large number of garments is being cut at a time. The laid fabric stack is called as lay. The cutting process includes number of sub-processes and flow of the processes is as following. Each process is briefly explained in the following.

Pattern / Marker: According to the design and fit, patterns of different garment parts are made on the pattern paper and cut into pattern pieces. For manual marker these pattern pieces are used for marker making. On the other hand in CAD system patterns are made in computer. Later using a plotter markers are made on sheet. In the second case cutting department receive ready marker.

Cut ratio receiving: Prior to cutting, cutting department get a job sheet from planning department or merchandiser or production manager that includes total quantity of garment pieces to be cut, sizes ratio of the garments and colour-wise size break up. According to the size and colour ratio cutting team prepare one marker or multiple markers. Marker length and number of lay to be cut are planned in this stage.

Fabric receiving: Fabric requirement for an order is calculated according to the average consumption of the fabric from the marker. In case of multiple colour order, colour wise requirement is made. Fabric department issue fabric to cutting against the fabric requirement (generally requisition slip is used).

Fabric relaxation: This process is optional. Specially used for knits fabric. During rolling of fabric it get stretched. So it is essential to bring the fabric on stable form otherwise garment would shrink after making. To relax the fabric roll or thān is opened and spread and kept for about 24 hours.

Spreading (Fabric Layering): In this stage fabric sheet is layered one above another maintaining pre-defined maker length and correct ply tension. Fabric is layered up to a certain height to avoid cutting quality problem. Spreading is done by manual layering or automatic layering machine can be used. During layering of the fabric, fabric edge is aligned at one side.

Marker Making: After layering of a lay, pre made paper patterns (or ready markers made by plotter) are placed on the top layer of the lay. In manual marker making, marking is done around each pattern shape using marking chalk. This process is called as marker making. In a marker all garment components are placed.

Cutting: Lay is cut following the marked lines on the top of the lay. Cutting is done using straight knife or other cutting means. In cutting process garment component are separated. On the basis of pattern shape different cutting method/ machine are selected.

Numbering: Separated garment components are numbered to ensure that in stitching all components from same layer are stitched together. It is important to avoid shade variation in a garment. Between the cutting and sewing processes cut components may be passed through other processes like printing and embroidery. There is maximum chance of mixing of the components. If there is layer number in each component then at the time of stitching only correct components will be stitched together.

Sorting: According to production system (Make through, progressive bundle or one piece flow system) cut components are sorted. In sorting all component of a garment placed together. Size wise sorting and in case multiple colours are cut in a single lay, colour wise sorting will be required.

Bundling: As per the production line requirement a certain number of pieces with all component are tied together. This process is known as bundling. Each bundle is marked with bundle number, style name, size number and quantity of pieces in that bundle. At this stage cutting are ready to send to production line for stitching.

Source: textileschool.com

YOU MAY ALSO LIKE

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisement - spot_img

Join Our Weekly Newsletter

spot_img

Upcoming Events

 

Simillar News

Recent Random

BIDA Signs MoU with Four Institutions, Adding Seven New Services to OSS

In a significant initiative to enhance and simplify investor services, the Bangladesh Investment Development Authority (BIDA) has signed separate Memorandums of Understanding (MoUs) with...

Why do you think factory owners are unable to pay their workers?

Abdullah Hil Rakib: The issue of factory owners being unable to pay their workers is a multifaceted problem that cannot be explained in a...

Bangladesh and Vietnam Strengthen Bilateral Investment Ties

H.E. Mr. Nguyen Manh Cuong, Vietnam's Ambassador to Bangladesh, met with Mr. Chowdhury Ashik Mahmud Bin Harun, the head of BIDA and BEZA. They...